Tank Industries Queensland - Rectangular Tanks

RECTANGULAR TANKS

"RP" Rectangular Panel Tanks have many applications and uses. They are designed with flexibility to meet the specific requirements of each customer’s unique situation.

Final tank sizing and dimensions can be designed to fit the most difficult applications or tight install locations.

Internally the tank will be complete with bracing rods and cleats to a size as directed by our engineer, suiting the dimensions and height of the tank.

The roof is constructed with Galvabond open web beams, purlins and brackets. Roofing materials are dual clad Zincalume sheets, fastened with “Tek” screws and sealed at the edges to provide proofing against vermin.

rectangular tank one

RP-GAL	Rectangular Panel - Galvanised and Gasket sealed
Tank panels are internally or externally bolted, depending on the application and/or install location, with high tensile bolts and nuts. Sealing gaskets are PVC High Density Foam, with a minimum thickness of 6mm and all sealants are high strength polyurethane elastomer, suitable for potable water.

RP-GAL-L	Rectangular Panel - Galvanised Liner sealed
Tank panels are externally bolted with high tensile bolts and nuts. The liner is full height and secured on the top edge of each tank with eyelets within reinforced webbing. Geotextile underlay is fitted to the underside of the base of the liner for that added protection. All liners used are rated for use with potable water, as per AS4020.

RP-SS	Rectangular Panel - Stainless Steel
For that special application where Stainless Steel materials must be used. All the other standard features of the RP-GAL tank with all internal flooded components in SS material.